Nexiq Blue-Link ELD 16-Pin OBDII Bluetooth Device — Diesel Laptops

€ 195.99 · 4.5 (786) · En stock

Nexiq Blue-Link ELD 16-Pin OBDII Bluetooth Device

The Nexiq Blue-Link ELD is designed to work with the various ELD software manufacturers. This version is designed for vehicles with an OBDII connection.

Features

1939 Protocol
OBD CAN (ISO15765) Protocol
Calculated Engine Hours If No ECM Support

General Support

Seamless Background OTA Firmware Updates
Secure Communications and Firmware Updates

Limited access to BLE bondable mode via physical pushbutton on device with built-in timeout.
All communications between mobile client and device employ standard BLE encryption.

Authentication required between mobile client and device to enable datalink communications, and to enable OTA device firmware update.
Encrypted firmware update file.
Running firmware locked and encrypted to prevent data extraction.

Automatic Vehicle Link Detection for ELD Data of Interest (Engine Controller)

CAN auto-baud detection

Calculated Odometer Support If No ECM Support
Fully-Documented Driver/Device API for Developing Mobile Apps To Communicate with the ELD

Bluetooth Support During Active Connection

Device Notification of Powered-On Date and Time
Log Record Parameter Support with Selectable Raw Data or Pre-Scaled Format, with the following information

GPS position and UTC time data
Vehicle Identification Number (VIN)
Engine serial number
Odometer
Engine hours
Vehicle speed

Log Records Notifications Automatically Occur at 15-Minute Intervals
Updated Log Record Can Also Be Requested Immediately by Mobile Client
Automatic Notification Of Each Vehicle Motion State Change

Key Off
Key On (Engine Off)
Key On (Engine Running)

Automatic Notification of Each Vehicle Motion State Change

In-motion event = vehicle exceeds 5mph after being considered motionless
Motionless = vehicle motionless for more than 3 seconds after being considered in-motion

Automatic Data Capture Timeout Notifications

Device checks for more than 5 seconds without one or more required core parameters being received from expected source (ECM or calculated), and sends notification to client application on each occurrence.
The following parameters subject to DCT check:

Odometer
Engine hours
Engine speed
Vehicle speed

Configurable Distance Traveled Notifications

Device sends periodic odometer notifications to mobile client for specified distance traveled. Default trigger is 5 miles, configurable via API call.
Configurable Hard Driving Detection and Notifications:
User-configurable mph/s threshold for device detecting hard acceleration/deceleration events and sending notifications back to mobile client

Bluetooth Support During Vehicle Activity with no Application Connection

Log Record on-device archiving, with flag indication of reason for each capture.
On subsequent mobile application connection, archived log records can then be retrieved via the following defined API commands:

15-minute periodic capture when engine running
Ignition-on (engine running) / Ignition-off events
Driving / Not Driving Events

Driving = 5mph or greater detected
Not Driving = motionless for more than 5 minutes after Driving event detected

Initial Data Capture Timeout event, i.e., first time any of 4 core parameters not received within 5-second timeout is detected.
Data Capture Recovery event, i.e., all four core parameters received within 5-second window after initial Data Capture Timeout event has been previously captured.

nexiq — Diesel Laptops

The Blue-Link™ 2 is an incredibly convenient and easy-to-use mobile vehicle interface that enables users to seamlessly communicate with heavy-duty

NEXIQ Blue-Link™ 2

Nexiq USB Link 2 Wired Edition with Diagnostic Software and Repair Information Cheap

for nexiq Adapter for Volvo Senyar Connector Adapter Cable,9 Pin to 16 Pin OBD2 Truck Diagnostic Scanner Cable Adapter for Diesel Engine : : Automotive